🏡 On‑Site Equipment Service for Local Landowners
If you have equipment on your property that needs attention — riding mowers, tractors, generators, backhoes, big or small — I can come out and take care of it.
🚜 Tractors & Older Equipment
(All prices are labor only
parts and supplies are separate)
If you have an older tractor or backhoe
that won’t start, needs a starter,
has electrical issues, or just needs
the fluids and filters gone through,
I can come out and take care of it.
-
Basic tractor/backhoe service: $250
-
Full oil, fluid, and filter changes: $200
-
No‑start / electrical troubleshooting: $150
-
Starter replacement: $150
-
Hydraulic leak repair: $200
-
Cylinder work: $250
-
Hose replacement: $120
Service Area
-
Loma Rica (home base)
-
Brownsville
-
Frenchtown (Oregon House area)
-
Oregon House
-
Bangor
-
Dobbins
No show‑up fees for anyone in these areas. Proudly serving the Yuba–Sutter area.
🔧 Small Equipment & Mowers
(All prices are labor only
parts and supplies are separate)
Riding mower, push mower, generator, or any small engine that’s running rough,
won’t start, or just needs a basic service,
I can come out and take care of it
with no show‑up fees, no weekend rates.
-
Riding mowers — big and small: $150
-
Push mower tune‑up: $80–$100
-
Generator service: $120–$150
-
Small engine troubleshooting: $100 minimum
⭐ Class 1 — Small Equipment
Skid steers, mini‑excavators, compact tractors under 50hp
• Typical service time: 1–2 hours
• Typical fluids: 2–3 gallons
• Typical filters: 2–4
Full PM Range: $450–$850
⭐ Class 2 — Heavy Equipment
Large loaders, graders, 55–120 ton excavators
• Typical service time: 2–4 hours
• Typical fluids: 4–8 gallons
• Typical filters: 3–6
Full PM Range: $1,000–$1,800
⭐ Class 3 — Very Heavy / Specialty
988 loaders, scrapers, dozers, haul trucks
• Typical service time: 4–6 hours
• Typical fluids: 8–15 gallons
• Typical filters: 4–8
Full PM Range: $1,800–$2,500
⭐ Class 4 — Specialty High‑Capacity Equipment
Large haul trucks, high‑horsepower scrapers, production dozers
• Typical service time: 6–10 hours
• Typical fluids: 15–30 gallons
• Typical filters: 6–10
Full PM Range: $2,500–$4,500
⭐ Class 5 — Extreme Duty / Multi‑System Machines
• Typical service time: 10–16 hours
• Typical fluids: 30–60 gallons
• Typical filters: 8–14
Full PM Range: $4,500–$7,500
⭐ Class 6 — Big Rigs / Commercial Trucks
• Typical service time: 2–4 hours
• Typical fluids: 3–6 gallons
• Typical filters: 3–5
Full PM Range: $650–$1,200
Large production excavators, mining loaders, multi‑system specialty equipment
Class 7–8 trucks, semis, dump trucks, vocational trucks
🛠️ On‑Site Equipment Service (Commercial)
(No travel fees No overtime charges No weekend mark ups)
Proudly serving the Yuba Sutter area
Contact us today for fast, accurate diagnostics and honest service.
⭐Ready to schedule service
or need a quote ?
⭐ What a Full PM Service Includes
• Engine oil & filter change
• Fuel filter replacement (as applicable)
• Hydraulic filter replacement (as applicable)
• Full chassis lube
• Cooling system inspection
• Belt & hose inspection
• Air filter service
• Battery & charging system check
• Brake system inspection
• Hydraulic system leak check
• Tire/track condition check
•DEF/aftertreatment check (as applicable)
• Full machine walk‑around & safety inspection
⭐ Diagnostic Health Check Included
• Dealer‑level electronic diagnostics using Jaltest
• Full electronic scan of engine and aftertreatment systems
• Review of active and stored fault codes with clear explanations
• Live data monitoring to verify sensor performance and system operation
• Aftertreatment system check including DEF system, DPF soot levels, and regen history
• Battery and charging system test
• Brake system diagnostic check including air system pressures, leaks, and component condition
• Visual inspection for leaks, worn hoses, loose hardware, and safety issues
• Operational check of travel, lift, hydraulics, and auxiliary functions
• Service interval verification and reset when supported
• Detailed onboard diagnostics (OBD) health report emailed to you the same day, including system status, fault causes, and recommended next steps
Our Hours
Mon: 8:00 AM – 5:00 PM
Tue: 8:00 AM – 5:00 PM
Wed: 8:00 AM – 5:00 PM
Thu: 8:00 AM – 5:00 PM
Fri: 8:00 AM – 5:00 PM
-------------------------
Sat: 8:00 AM – 5:00 PM
Sun: 8:00 AM - 5:00 PM